Polling Ourselves
-
@jack-waugh Yes, likewise. My ballots were full of omissions.
-
Wouldn’t Score(0-100) be better than Score(0-9) for the RP/Score hybrid? It would have room for expression of all pairwise preferences, instead of sometimes forcing equal-rating.
I think Hybrid is great for this poll. Strategy-free RP(wv) result, but accompanied by a reliably-sincere likedness-count.
Just as EqualVote speaks of, the desire to express all pairwise preferences for the RP count will encourage sincerity for the Score ratings. I first heard that principle from EqualVote, in thei discussion of STAR.
I rank it 3rd. The reason why I don’t approve it is because, in public political elections, I like the defense strategy of never ranking someone you don’t like…to further enhance RP(wv)’s already powerful burial deterrence.
As Jack spoke of, I’ll soon re-post my ballots with the omissions fixed.
-
@michaelossipoff said in Polling Ourselves:
Wouldn’t Score(0-100) be better than Score(0-9) for the RP/Score hybrid? It would have room for expression of all pairwise preferences, instead of sometimes forcing equal-rating.
Possibly. I kept it at 0-9 for simplicity, but I wouldn't object to 0-100 or 0-99. (There has been debate in the past over whether 10 and 100 or 9 and 99 are better as max scores. I'm fairly unbothered by it.)
-
@toby-pereira, Smith // Score can be tallied with just the preference matrix total and the score totals, right? No need to bring the entire pile of ballots to a center for tallying.
-
I propose that for purposes of tallying the poll, we pretend we are not all voting in the same "precincts". Talliers can thereby demonstrate that it is not necessary to bring the ballots to the tallying location. We can have two pretend precincts and try to balance them more or less.
-
@jack-waugh said in Polling Ourselves:
@toby-pereira, Smith // Score can be tallied with just the preference matrix total and the score totals, right? No need to bring the entire pile of ballots to a center for tallying.
I don't know much about that side of things.
-
What's the goal with such a poll? Is it to provide information for the public, or to make some decision within this group?
Ideally I'd like to see a poll including as many economists, social choice theorists, voting reform advocates, etc. as possible with snowball sampling, and publishing all ballots together with a data analysis (rather than just a single winner or ordering). The results can be published in a paper that can be cited to support claims like "Experts generally believe system A is better than B."
-
@lime There is no proposal to make any formal decision within the group.
Some have proposed repeated polling and I agree with this.
I think the goal of the current one is to inform us of our aggregate attitude toward the single-winner systems, mainly as to their merits for proposing to the public for political elections. Knowing this attitude and some statistics over our votes (do they cluster?) might lead to discussions that we might otherwise not have thought to enter. I think this is valuable. Also, some of us like to describe or invent systems as intellectual curiosities, and the polls (including the current one) can help us as a group distinguish between those and the serious proposals.
I would not oppose trying to implement for a future polling, the ideal you state. You are not the first to suggest asking for votes from members of the larger voting-systems interest community going beyond just the participants in this forum.
-
@lime The public can read this forum and if any of us thinks the set of participants in the current polling or a future one merits mentioning the poll and its outcome in other fora, antisocial media, and/or personal communications, I don't see anything wrong with that. Promoting reform or revolution can be a goal.
-
@toby-pereira said in Polling Ourselves:
@michaelossipoff said in Polling Ourselves:
Wouldn’t Score(0-100) be better than Score(0-9) for the RP/Score hybrid? It would have room for expression of all pairwise preferences, instead of sometimes forcing equal-rating.
Possibly. I kept it at 0-9 for simplicity, but I wouldn't object to 0-100 or 0-99. (There has been debate in the past over whether 10 and 100 or 9 and 99 are better as max scores. I'm fairly unbothered by it.)
@toby-pereira said in Polling Ourselves:
@michaelossipoff said in Polling Ourselves:
Wouldn’t Score(0-100) be better than Score(0-9) for the RP/Score hybrid? It would have room for expression of all pairwise preferences, instead of sometimes forcing equal-rating.
Possibly. I kept it at 0-9 for simplicity, but I wouldn't object to 0-100 or 0-99. (There has been debate in the past over whether 10 and 100 or 9 and 99 are better as max scores. I'm fairly unbothered by it.)
0-9 or 0-99 is much more line space-efficient. 0-10 or 0-100 gives you one more rating-slot, , 10/9 or 100/99 times as many rating-slots, but requires 2 or 3/2 times as much linespace.
But linespace isn’t an issue at all in our balloting, & so, if it were my choice, I’d use 0-10 or 0-100.
But either is fine with me.
But you’re probably right to use 0-9 instead of 0-99 for Hybrid, because someone could rate 99 & 98, in order to effectively do all-or-nothing strategy while still expressing a pairwise preference.
Hybrid doesn’t combine pairwise expression with sincerity incentive as well as I thought, but I’ll still rank & rate it as high as Score(100, 99, 50, 1, 0).
I heard Williamson in a debate, & based on that, I’ll still rank her 2nd, but I won’t approve her.
-
It’s taking me this long to get to re-posting my poll-ballots because I choose to vote every by every method proposed for the poll. A few others likely will also, but I emphasize that it isn’t necessary for participation.
You can, for example, just vote an Approval-set & a ranking, & maybe a Score ballot by your 1 favorite Score balloting.
(My favorite Score balloting is now Score(0-5). )
The tacitly-agreed-upon end-date for voting is still 10 days away.
Anyway, my ballots:
Voting-Systems:
Approval Set:
{Approval, RP(wv)}
Ranking:
- Approval
- RP(wv)
- Score(0-5)
- Score(0-10)
- Score(100, 99, 90, 50, 10, 1, 0)
- Hybrid
- Score(2,1, 0)
(I think that’s all of the “ candidates”.)
By Score(0-5) (for elections):
Approval: 5
RP(wv): 5
Score(0-5): 3
Score(100, 99, 90, 50, 10, 1, 0): 2
Score(0-10) & Hybrid : 1By Score(0-5) (for polls):
RP(wv), with Score(0-5) & Approval, & maybe Score(100, 99, 90, 50, 10, 1, 0): 5
By Score(100, 99, 90, 50, 10, 1, 0) (elections):
Approval: 100
RP(wv): 100
Score(0-5): 50
Score(100, 99, 90, 50, 10, 1, 0): 50
Score(0-10): 10
Score (2, 1, 0): 1By Score(100, 99, 90, 50, 10, 1, 0) (pols):
RP(wv), with Approval, Score(0-5), & maybe Score(100, 99, 90, 50, 10, 1, 0): 100
Presidential Candidates:
Approval Set:
{Jill Stein}
Ranking:
- Jill Stein
- Marianne Williamson
By Score(0-5):
Jill Stein: 5
Anyone else: 0 -
@michaelossipoff said in Polling Ourselves:
(I think that’s all of the “ candidates”.)
They are at https://www.votingtheory.org/forum/post/3169 .
Hybrid
I suppose by that you might mean any and all of:
- STAR (Ossipoff, Waugh)
- Smith//Score (0 to 9 ballot) (Pereira)
- quantile-normalized score, with integer scores from 0 to 100 (Frankston)
-
Preliminary result.
Approval shows a commanding lead!
I edited and may edit again.
Fri Mar 15 06:34:20 AM UTC 2024
For elections.
Based on Score{100, 99, 90, 50, 10, 1, 0}.200 Approval 150 Score{5, 4, 3, 2, 1, 0} 149 Score{100, 99, 90, 50, 10, 1, 0} 110 0-9 score [note 0] 101 Score{2, 1, 0} 101 0 to 9 scale (only used for ranking), ranked pairs, winning votes. [note 1] 100 Ranked-Pairs(winning-votes) equal-ranking allowed 099 STAR 000 quantile-normalized score, with integer scores from 0 to 100
[0] @MichaelOssipoff says Score(0-10), which is not nominated, and I am counting it as Score{0-9}.
[1] Ossipoff does not directly indicate this nominee, but I'm assuming he likes it as much as he does the ranking version allowing equal ranking, since for purposes of determining the winner, the scores in this are only an encoding of a ranking allowing equal-ranking. -
By “Hybrid”, i just meant Score(0-9) balloting counted as RP(wv).
Yes, Approval is the natural compromise, though we like different elaborations.
I forgot about STAR. I rank & rate it with Hybrid.
-
@michaelossipoff said in End of poll-balloting at the next midnight:
Score(100, 99, 90, 50, 10, 1, 0)
Your and my ballots are the only ones I know about. I tried to tally them in Score(100, 99, 90, 50, 10, 1, 0), but I based that version of the tally on an interpretation of your ballot that turned out to be not quite in accord with your later clarification. But the lead that that tallying shows for Approval over the rest of the pack is probably pretty accurate.
-
I don't know how to tally in RP(wv).
For purposes of tallying
Score(0-5)
Score(100, 99, 90, 50, 10, 1, 0),here is an attempt to interpret @MichaelOssipoff's ballot while staying confined to the actual nominees.
First, let's list again the nominees as I had compiled above.
- Approval
- Ranked-Pairs(winning-votes) equal-ranking allowed
- STAR
- Score{2, 1, 0}
- Score{100, 99, 90, 50, 10, 1, 0}
- Score{5, 4, 3, 2, 1, 0}
- 0 to 9 scale (only used for ranking), ranked pairs, winning votes
- Smith//Score (0 to 9 ballot)
- quantile-normalized score, with integer scores from 0 to 100
- 0-9 score
Now let's bring in @MichaelOssipoff's "ballot" as of the most recent place where he tries to present it in full:
@michaelossipoff said in Polling Ourselves:
By Score(0-5) (for elections):
Approval: 5
RP(wv): 5
Score(0-5): 3
Score(100, 99, 90, 50, 10, 1, 0): 2
Score(0-10) & Hybrid : 1... [skipping entries "for polls", a category we never agreed on]
By Score(100, 99, 90, 50, 10, 1, 0) (elections):
Approval: 100
RP(wv): 100
Score(0-5): 50
Score(100, 99, 90, 50, 10, 1, 0): 50
Score(0-10): 10
Score (2, 1, 0): 1He later explains what "Hybrid" means:
@michaelossipoff said in Polling Ourselves:
By “Hybrid”, i just meant Score(0-9) balloting counted as RP(wv).
...
I forgot about STAR. I rank & rate it with Hybrid.So that explains Hybrid.
The other problem with Michael's ballot is that it mentions Score(0-10), a non-nominee. In my preliminary tally above, I counted that as 0-9 score. But this time, I'm in the mood to be strict (since this is the end), so I am going to throw it out.
So let's map the entries of his Score(0-5) ballot to the nominees:
- 5 Approval
- 5 Ranked-Pairs(winning-votes) equal-ranking allowed
- 1 STAR
- 0 Score{2, 1, 0}
- 2 Score{100, 99, 90, 50, 10, 1, 0}
- 3 Score{5, 4, 3, 2, 1, 0}
- 1 0 to 9 scale (only used for ranking), ranked pairs, winning votes
- 0 Smith//Score (0 to 9 ballot)
- 0 quantile-normalized score, with integer scores from 0 to 100
- 0 0-9 score
And let's do the same wth his Score(100, 99, 90, 50, 10, 1, 0) ballot:
- 100 Approval
- 100 Ranked-Pairs(winning-votes) equal-ranking allowed
- 000 STAR
- 001 Score{2, 1, 0}
- 050 Score{100, 99, 90, 50, 10, 1, 0}
- 050 Score{5, 4, 3, 2, 1, 0}
- 000 0 to 9 scale (only used for ranking), ranked pairs, winning votes
- 000 Smith//Score (0 to 9 ballot)
- 000 quantile-normalized score, with integer scores from 0 to 100
- 000 0-9 score
-
Tally in 0-5:
(Ossipoff + Waugh = total)
same order as I listed the nominees
- 5 + 5 = 10 Approval
- 5 + 0 = 05 Ranked-Pairs(winning-votes) equal-ranking allowed
- 1 + 4 = 05 STAR
- 0 + 5 = 05 Score{2, 1, 0}
- 2 + 5 = 07 Score{100, 99, 90, 50, 10, 1, 0}
- 3 + 5 = 08 Score{5, 4, 3, 2, 1, 0}
- 1 + 1 = 02 0 to 9 scale (only used for ranking), ranked pairs, winning votes
- 0 + 4 = 04 Smith//Score (0 to 9 ballot)
- 0 + 0 = 00 quantile-normalized score, with integer scores from 0 to 100
- 0 + 5 = 05 0-9 score
Reorder by descending totals:
- 5 + 5 = 10 Approval
- 3 + 5 = 08 Score{5, 4, 3, 2, 1, 0}
- 2 + 5 = 07 Score{100, 99, 90, 50, 10, 1, 0}
- 5 + 0 = 05 Ranked-Pairs(winning-votes) equal-ranking allowed
- 1 + 4 = 05 STAR
- 0 + 5 = 05 Score{2, 1, 0}
- 0 + 5 = 05 0-9 score
- 0 + 4 = 04 Smith//Score (0 to 9 ballot)
- 1 + 1 = 02 0 to 9 scale (only used for ranking), ranked pairs, winning votes
- 0 + 0 = 00 quantile-normalized score, with integer scores from 0 to 100
Approval has a 20% lead over the runner-up.
-
Tally in Score{100, 99, 90, 50, 10, 1, 0}:
(Ossipoff + Waugh = total)
same order as I listed the nominees
- 100 + 100 = 200 Approval
- 100 + 000 = 100 Ranked-Pairs(winning-votes) equal-ranking allowed
- 000 + 099 = 099 STAR
- 001 + 100 = 101 Score{2, 1, 0}
- 050 + 099 = 149 Score{100, 99, 90, 50, 10, 1, 0}
- 050 + 100 = 150 Score{5, 4, 3, 2, 1, 0}
- 000 + 001 = 001 0 to 9 scale (only used for ranking), ranked pairs, winning votes
- 000 + 090 = 090 Smith//Score (0 to 9 ballot)
- 000 + 000 = 000 quantile-normalized score, with integer scores from 0 to 100
- 000 + 100 = 100 0-9 score
Reorder by descending totals:
- 100 + 100 = 200 Approval
- 050 + 100 = 150 Score{5, 4, 3, 2, 1, 0}
- 050 + 099 = 149 Score{100, 99, 90, 50, 10, 1, 0}
- 001 + 100 = 101 Score{2, 1, 0}
- 100 + 000 = 100 Ranked-Pairs(winning-votes) equal-ranking allowed
- 000 + 100 = 100 0-9 score
- 000 + 099 = 099 STAR
- 000 + 090 = 090 Smith//Score (0 to 9 ballot)
- 000 + 001 = 001 0 to 9 scale (only used for ranking), ranked pairs, winning votes
- 000 + 000 = 000 quantile-normalized score, with integer scores from 0 to 100
Approval beats the runner-up by 25%, he exclaimed.